Quote:
Originally Posted by bernardin  My only question about the Misono is the bevel. It seems to be heavily favoured to the right side. Looks about a 80/20 %. No problem, it works fine, but I was wondering what benifit, it any, this is and whether slowly sharpening it to a 50/50 would hurt the performance. |
If you think a Misono Sweden is sharp OOTB (out of the box), wait til you sharpen it. Misono doesn't bring the knife to anywhere near its potential.
Whether there's any performance gain from asymmetric sharpening is controversial. The knife nuts who are disposed to favor all things Japanese are in love with asymmetry -- the more the better. The way things are going in the world of culinary cutlery, that's most of the knife nuts. (As you pointed out the differences between the best of German stainless and a merely good Japanese knife aren't subtle -- with all of the performance advantages to the Japanese.)
The main arguments are that asymmetric edges stay sharper as they wear, and asymmetric edges don't "wedge" as much. The counter arguments are that dulling is more often the result from deformation (waving and rolling caused by impact) that; and that except in the case of fish, wedging at the edge itself doesn't make enough difference to matter at all. And even with fish, absolute sharpness (width at the edge itself) trumps thickness close to it -- as long as the blade isn't very thick.
The major drawbacks are (1) that asymmetric edge tends to steer. The effect is heightened any grip problems (such as too tight, bent wrist, etc.), and by wrong-handed use (related, if you think about it). The tendency increases with degree of asymmetry. (2) The only way to true the edge is on a stone.
None of this stuff is huge. Personally, I tend towards the nay-sayers. For almost all purposes the benefits of a more symmetric bevel outweigh those from extreme asymmetry. Most important are that a fairly symmetric bevel is more robust and can be steeled (the two are related). I've also noticed that most of the people who claim superiority for the chisel type edge sharpen a lot more often than I consider reasonable. If it's such a long wearing edge, wtf?
Misono Swedens profile easily given their hardness -- and you won't have much difficulty sharpening the knife to any profile which strikes your fancy. It's a perk of knowing how to sharpen.
Right now my chef's knife is sharpened to around 60/40 righty. I'm a lefty and can't feel the imbalance. Take it past that, and it gets annoying. Similarly, up to around 70/30 lefty, I don't feel any difference. Around 80/20 I can feel it, but don't get much for it -- certainly nothing worth the edge's tendency to deform. My knife is only hardened to around 57ish, and yours to 60 (or maybe an RCH more), but still...
The one area where asymmetric bevels noticeably pay off is with raw fish. If I did a lot of fish butchering and/or sushi type cutting, I'd probably use Japanese blade profiles sharpened to single sided bevels.
Thanks for letting me vent.
BDL
Misono Swedish Carbon Steel 
