or Connect
ChefTalk.com › ChefTalk Cooking Forums › Food & Equipment Reviews › Cooking Knife Reviews › Artifex extra tall aka Richmond Addict with western handle
New Posts  All Forums:Forum Nav:

Artifex extra tall aka Richmond Addict with western handle

post #1 of 14
Thread Starter 

Wanted a replacement for my Henckels. I settled on the Artifex extra tall. It was either this or the Fujiwara FKM.

 

 

The factory edge is okay, but I decided to take it out and put it through all my stones. The knife is very light, balance point is more towards the handle (behind my pinch). Also I like how the spine has been rounded its a nice touch. I've done some light work with it. 

 

I need to do a little more work on the tip, but right now I'm very happy with it (guess I'm easily pleased). I also need clean up the scratches more, but that's for the weekend!

post #2 of 14

You'll like how easily the AEB-L blade sharpens.  And yes, it's a shame that Lamson does a crap job of polishing out knives they make before putting them in the box.

 

And of course;  Congratulations!  bounce.gif  Enjoy it in the best of health. 

 

BDL

post #3 of 14
Thread Starter 
Quote:
Originally Posted by boar_d_laze View Post

You'll like how easily the AEB-L blade sharpens.  And yes, it's a shame that Lamson does a crap job of polishing out knives they make before putting them in the box.

 

And of course;  Congratulations!  bounce.gif  Enjoy it in the best of health. 

 

BDL

 

Actually the scratches were from me :( . Going to get a trizact pad tonight (my old one is worn out) to get the scratches out (hub cap polish worked a little). The knife sharpens very well, however the burrs are a little more stubborn than white #1 (initial impression anyway!) TBH, its as sharp as white #1 (hard for me to tell). The knife is a steal at 90 bucks.

post #4 of 14
Thread Starter 

 

Got some light work done with my Artifex. I decided to thin behind the edge a little more. Subjectively, speaking it feels a lot sharper than my Fujiwara FKH now (with thinning, about the same without). I made a video for slicing a tomato (sharpened as best I can). Kinda wish I tried the OOTB edge to test the difference.

 

Comparing the Artifex to my Goko (only other high end knife I have now. The Goko is much thinner behind edge). Both can get very sharp, the biggest difference in terms  of feel is balance. The weight of the Artifex is behind my pinch while the Goko is definitely blade heavy. I feel more comfy with my Goko (maybe because I've grown more use to the Goko) for most tasks atm.  

 

Pics after thinning (~ 1.5 on Beston):

 

 

Comparison vs Goko:

 


Edited by harlock0083 - 7/22/13 at 7:28pm
post #5 of 14

Enjoy your purchase!

post #6 of 14
Thread Starter 

Thanks!

post #7 of 14
Thread Starter 

Going to bump this a little for an update with some more thoughts. 

 

Thoughts on sharpening:

 

AEB-L can get very sharp, but the burrs for me are extremely stubborn (I've stropped on bare leather and have run it through some hard felt. I can still feel some where the knife starts to curve towards the tip). I've heard people say AEB-L is like sharpening carbons... I'm going to disagree for now. Also after extensive comparison (take with a grain of salt I guess as I'm not a great free hand sharpener) my Goko white #1 will get sharper (not that it matters TBH unless you whittle hair for a living). 

 

Thoughts on FF:

 

This is an ugly knife (to me any way, profile is a bit weird).

Rounded spine and choil is a plus.  

Also, I've notice a slight bend in the knife when staring at the spine. I've bend it a few time between cutting boards and have alleviated the issue somewhat.

 

Okay, I'm done now. :)

post #8 of 14

having personally sharpened a lot of AEB-L myself, i would say that depending on the HT, it really can be a lot like carbon.  But clearly, that does not mean that regardless of heat treatment, it will always be that way because of what it is.

post #9 of 14
Thread Starter 

First AEB-L knife for me, just a little frustrated with the burrs atm. 

post #10 of 14
Thread Starter 

I finally took the time to clean up the knife a bit from the thinning i did on it.

 

 

That took a lot more elbow grease than I thought originally ~6 hrs of polishing (400/800 wet/dry sandpaper, micromesh, hub cap polish Mother's brand, and finally a lot of Flitzing...).

post #11 of 14

confused.gif

Quote:
Originally Posted by harlock0083 View Post

I finally took the time to clean up the knife a bit from the thinning i did on it.

 

 

That took a lot more elbow grease than I thought originally ~6 hrs of polishing (400/800 wet/dry sandpaper, micromesh, hub cap polish Mother's brand, and finally a lot of Flitzing...).

Not trying to be a "SA" , are you putting your knife on display after each use, or putting it away after each use, or it's bothering the turd out of you because of the scratches.?

post #12 of 14
Thread Starter 

The scatches from thinning were annoying. It goes in the knife block after each use :)

post #13 of 14
Quote:
Originally Posted by harlock0083 View Post

Going to bump this a little for an update with some more thoughts. 

 

Thoughts on sharpening:

 

AEB-L can get very sharp, but the burrs for me are extremely stubborn (I've stropped on bare leather and have run it through some hard felt. I can still feel some where the knife starts to curve towards the tip). I've heard people say AEB-L is like sharpening carbons... I'm going to disagree for now. Also after extensive comparison (take with a grain of salt I guess as I'm not a great free hand sharpener) my Goko white #1 will get sharper (not that it matters TBH unless you whittle hair for a living). 

 

Thoughts on FF:

 

This is an ugly knife (to me any way, profile is a bit weird).

Rounded spine and choil is a plus.  

Also, I've notice a slight bend in the knife when staring at the spine. I've bend it a few time between cutting boards and have alleviated the issue somewhat.

 

Okay, I'm done now. :)

 

AEB-L by one maker is NOT necessarily going to perform the same as AEB-L by another maker, just like White #2 by one maker is not necessarily going be the same as White #2 by another maker. 

post #14 of 14
Thread Starter 
Quote:
Originally Posted by mhlee View Post

 

AEB-L by one maker is NOT necessarily going to perform the same as AEB-L by another maker, just like White #2 by one maker is not necessarily going be the same as White #2 by another maker. 

 

:) Just found out the hardway.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Cooking Knife Reviews
ChefTalk.com › ChefTalk Cooking Forums › Food & Equipment Reviews › Cooking Knife Reviews › Artifex extra tall aka Richmond Addict with western handle