Chef Forum banner

Looking for a new Japanese Knife.

4K views 23 replies 7 participants last post by  thenewguyaround 
#1 ·
Hello Chef Talk, I am no professional chef but I do cook a lot and enjoy really nice knives that don't break a wallet, I am currently looking for a Japanese Knife and wanted to hear your guys opinion about a couple i'm looking at, I have been looking at the Tojiro Black Finished Shiro-ko Kasumi Gyutou - 8.2" knife () and wanted to possibly hear opinions over it, other one is the Tojiro DP Gyutou - 8.2" (), not sure what people would most recommend but I have owned quite a few Carbon Steel Knives and know how to take care of them and willing to properly, not sure if that changes anything and wanting to hopefully hear if anyone has any recommendations for one that is not overly expensive like a Shun or something.
 
#3 · (Edited)
I have a petty from the Tojiro shirogami line. It's very bare bones white steel, very easy to sharpen, edge retention is okay. The kurouchi finish rubs off and is kind of thin. When you wipe your knife, as you will often to clean and dry a carbon steel knife, it is rough and causes friction against a towel. The handle is awful. To be clear I prefer wa handles like this, but this particular handle is bad. Didn't like the shape or weight or the plastic ferrule that is too small and not flush with the wood. So yes it is 1/2 to 1/3 the price of a good quality basic carbon steel wa handled gyuto but it has a few minor issues. It's a good project knife if you plan to replace the handle, sand off and refinish the blade, etc.

The Tojiro DP is stainless and good to go out of the box. It benefits from a little thinning behind the edge but other than that it is a goldilocks kind of knife. Not too thin not too thick, not too hard or soft. I think it is a good starter knife as you learn to sharpen and decide what your preferences are. It's the best you can do at $60

If you stretch your budget to $100 or $150 we have many different recommendations, whether it is worth it to you or not who knows
 
#6 ·
I actually really like how that knife is and will most likely get that one since it is a starter Japanese Knife but curious if there is a big difference between the oval handle and the octagon handles, is one more comfy or is it a sort of preference thing and curious what is so special damascus steel.
 
#7 ·
That very first one you mentioned, the Tojiro Black Finished Shiro-ko Kasumi Gyutou, is very nice, in all kinds of ways. I don't have that one, but 3 much like it. It's inexpensive, works well in a pro kitchen, is easy to sharpen and you can practice and learn all day with it. In a coupla years, when you've worn it down to a pickle-sticker you can just get a new knife rather painlessly for the investment.
 
#8 · (Edited)
'Damascus steel' in this price range is just visual patterning on the cladding layers

Have oval, have octagonal, have right and left 'D' shapes, western handles, they're all fine so long as you don't have a very fixed handle preference. Handles that run narrow in diameter can be less liked by some. I pinch grip blades so there is not that much handle contact anyways.

How are you sharpening your knives?
 
#13 ·
That very first one you mentioned, the Tojiro Black Finished Shiro-ko Kasumi Gyutou, is very nice, in all kinds of ways. I don't have that one, but 3 much like it. It's inexpensive, works well in a pro kitchen, is easy to sharpen and you can practice and learn all day with it. In a coupla years, when you've worn it down to a pickle-sticker you can just get a new knife rather painlessly for the investment.
I have to highly disagree here man, haha. I love the DP series, but that cheapo white steel knife is just awful. Actually bought one for a friend years ago and it was terrible. Super prone to instant rusting, smells so funky when wet, ugly patina, handle is utter crap and the grinds were like 4 hours on the stones away from being acceptable and uniform and apparently that reputation precedes it outside my sole encounter.
 
#18 ·
I went to the knife shop today and ended up getting a Damascus steel Santoku after looking at many it felt the best and the people highly recommended it for new Japanese knife users as a use friendly knife that can be easy to learn sharpening and doesn't break to easy, they said it does actually cost 10 dollars to get it sharpened and the guy said if I bring it in since I bought it from them he will give me some demonstrations on how to sharpen it and let me try later on since it was already perfectly sharp.
 
#21 ·
Sorry for the long wait, these are the only current photos I have, it's a 7in Santoku, forgot the maker, think it was Yoshihiro, and curious does anyone happen to have a recommendation for a decent knife set for around 100 - 200 dollars that is not to bad for new cooks? Need to get a new set for the family and they don't want anything to fancy.
 
#23 ·
TheNewGuyAround,

Try Chicago Cutlery...they are in your price range and will take an edge and family abuse. I used a set for 15 years 35 years ago. I ended up giving them to a new cook. Lots of life left after I was done with them. Quite a few handle styles available as well.

Mojak
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top